Skip to content

Factory-direct industrial adhesives — bulk pricing for manufacturers & distributors

November 15, 2026

Contact adhesive application: 6 steps to a stronger bond

Contact adhesives (quick glues) are among the most widely used adhesives in furniture, footwear and construction. Used correctly, they deliver an immediate, strong bond. Used incorrectly, they cause bubbles, weak edges and delamination. Follow these six steps.

  1. Prepare the surfaces. Both parts must be clean, dry and free of oil, wax and dust. Lightly sand glossy surfaces.
  2. Condition the adhesive. Stir before use and work at normal room temperature. Cold adhesive spreads poorly; very hot conditions shorten working time.
  3. Coat both surfaces. Contact adhesives need a film on both parts. Apply a thin, even coat — thicker is not stronger.
  4. Wait for touch-dry. Let the solvent evaporate until the film no longer sticks to your knuckle. Joining too early traps solvent and weakens the bond.
  5. Position carefully. The bond forms instantly on contact, so align the parts before they touch. Use spacers for large panels.
  6. Apply pressure. Press firmly over the full area with a roller or press, working from the centre outward to push out air.

For general wood, laminate and rubber work we recommend GWE99. For porous foam and automotive interiors, choose Auto Bond ABP-22. Always work in a well-ventilated area and keep adhesives away from flames.

Share: